RIMMING MACHINES
4550 VS Rimming Machine
The 4550 VS Rimmer is a single bowl feeder machine . This machine is the standard for private mints. PLC controls and air tracks can be added as an option.
- Production Rates
- 500 – 6,500 blanks per minute
- Blank Sizes
- .06″ – 1.850″ diameter
- 0.035′” – 0.1875 thick
- Main Drive
- 5 HP Adjustable Frequency drive
- Bowl Feed Drive
- 3.4 HP adjustable frequency
- Power Requirements
- Standard 220 vac 60HZ 3 Phase
- Other voltages avaliable upon request
- Weight
- Approximately 1500 Lbs
- Foot Print
- 30″ x 30″, discharge is at 38″
4500 Proof rimmer
This Rimmer was designed for the proof coin. There are no feeders. The blank floats on an air cushion. The blanks do not touch each other so there is no damage. The rimmer has air tracks on the entrance and exit.
- Production Rate
- Hand Feed
- Blank Sizes
- 0.6″ – 1.9″ Dia
- 0.035″ – 0.1875″ thick
- Main Drive
- 3HP
- Variable Speed
- Power Requirement
- Standard 220 vac 60HZ 3 Phase
- Weight
- 1000 Lb
Rimming Machine Series 7500
The 7500 Series Dual-Feed machine is our most powerful, robust, and fastest machine yet. Its dual-feed capability was specifically designed to give the user the option to rim hard blanks by utilizing either one or both feeders. The rigidity of the machine ensures that it outputs blanks of diameters within 0.0127 mm (0.0005 in), even if only one feeder
is running.
7500 Series brochure available upon request.
Key Features
- Two Bowl Feeders provide high capacity for high-volume applications
- Highly robust spindle assembly for high-precision rimming
- Each bowl feeder can be run independently of the other with no effect on overall precision.
- All components are directly driven; No drive belts or chains are implemented.
- (Optional) Air-feed tracks convey blanks into and out of the machine on a layer of air for increased endproduct quality.
- Two Sliding Protective Guards enclose the rimming components to ensure operator safety.
- Two Safety Interlock Switches ensure that the machine will not run if both covers are not in their full-closed position.
- Pressure-fed oiling system for spindle bearings and main drive gearbox.
- One 7.5 kW (10 HP) main drive motor
- Main drive gearbox is rated at 22 kW (30 HP) to ensure longevity.
- Two 0.75 kW (1 HP) bowl feed drive motors.
- Bowl feed gearbox is rated at 4 kW (5 HP) to ensure longevity.
- Operator-controlled potentiometers to adjust speed of bowl feeders and main drive individually.
- Message center/maintenance reminder advises of maintenance intervals and of any faults.
- Auto-shut-off: Machine will shut down if there is no activity for a prolonged amount of time. This is to minimize energy waste.
- Auto-reverse: Bowl feeders automatically reverse rotation if the machine senses no blank flow during the rimming operation (i.e. - if the bowl feeder cannot flow blanks due to a bent blank blocking the flow path).
- The auto-reverse function can be manually disabled in low volume applications where blank flow is intentionally intermittent. This can be applied to each feeder independently.
- Bowl feed level sensors communicate with on-board electronics. The machine can control the operator's in-feed conveyor.
- The machine will halt in-feed if the machine halts.
- In-feed conveyor can communicate to the machine if in-feed jams or otherwise stops. The machine will stop upon receiving such communication.
Rimmer Tooling
We can manufacture new segments made for machines by others along with rings and shoes.
This is a rimming machine in South Africa running.